🚚 Free shipping on all complete coilover kits — Australia wide

SKU SP-4PCE-KIT-TANKLESS-12.5MM/12.5MM

Stanceparts Tankless Complete Air Cup Kit (4pce) - Front & Rear

SKU SP-4PCE-KIT-TANKLESS-12.5MM/12.5MM

$1,949.00

inc. GSTBackorder

or 4 interest-free payments of $487.25 with Afterpay or Zip

Front Shaft Size
Rear Shaft Size
PRE-ORDER APPROX. 7-10 days
  • Free express ship Australia-wide
  • 12-month warranty Genuine BC cover
  • Rebuildable for life Service & refresh, not replace
  • Spares in stock Fast parts, no overseas wait

Overview & features

AIR CUP LIFT SYSTEM

A perfect combination of air ride and coilovers. With air cup suspension, you keep the ride quality and performance of your coilovers and have the ability to raise your car with the push of a button. A great system for show, track, drift, or daily-driven cars.

HOW DOES IT WORK?

It is an air cylinder on top of your coilover. Normally, you will drive low, without the cups pressurised. Whenever you need to pass an obstacle, such as a speed bump or a driveway, you can apply pressure to the cups and it will raise your car by 50mm.

UNIVERSAL

The air cup lift system will fit on 90% of any brand of coilovers. Though your coilover must meet a certain dimensional requirement, otherwise, the system will not fit.

The Stanceparts 2-piece Tankless system takes around 4-5 seconds to lift a vehicle. With the addition of two extra air cups required to build a 4-piece Tankless system, this time would be increased to approximately 10 seconds.

This lift time should be considered before purchasing and used in cases where the space required to mount a compressor tank is not preferred or an option for fitment.

This kit includes everything you need to install the air cup lift system:

  • 4 air cups
  • 150psi compressor setup
  • Wiring harness
  • 2 3-way valve
  • Pre-wired 16mm LED switch
  • 12-meters airline
  • 3 T-splitters

2-year warranty on the air cups.
1-year warranty on the compressor setup.

 

***** ATTENTION: IMPORTANT FITMENT NOTES *****

1. Stanceparts air cup kits are universal fitment and not supplied for vehicle-specific models. Always make sure you have enough clearance around the coilovers; the air cups are 120mm in diameter, and the fitting is 17mm. (110mm air cups are available on request at the time of ordering)

2. Vehicles using a rear separate shock and spring, please get in touch with us to confirm if there is a custom cup kit option available for your vehicle. 
For these vehicles, where a true type rear coilover has been installed in place of a separate spring and shock damper, an air cup cannot be installed due to clearance problems.

For a guide on how to measure for the Stanceparts cup sizes required, & Installation,
Click Here for STANCEPARTS FITMENT REQUIREMENTS

Shaft diameter:

  • 12.5mm 
  • 14mm
  • 15mm
  • 16mm
  • 18mm
  • 20mm
  • 22mm
  • 40mm
  • 44mm
  • 44.5mm
  • 45mm
  • 50mm Custom
  • 53mm Custom 

For assistance when ordering, email us at sales@bcracing.com.au.

What's in the box

    Specifications

    SKU SP-4PCE-KIT-TANKLESS-12.5MM/12.5MM
    Availability 7-10 Days
    DESIGN Not available
    SERIES Not available
    Camber Tops Not available

    Shipping & returns

    Free express shipping Australia-wide on complete coilover kits, dispatched next business day from Kirrawee, NSW. Change-of-mind returns are accepted within 30 days on unfitted, as-new kits in original packaging.

    Warranty

    Every BC Racing coilover is covered by a genuine 12-month warranty and is fully rebuildable and serviceable for life. Spare parts are stocked locally, so there's no overseas wait to keep your kit performing.

    Common questions

    Will this kit fit my vehicle?

    Yes — this kit fits all body styles.

    If you have a non-standard chassis or factory suspension upgrade, contact us before ordering and we’ll confirm fitment.

    Can I adjust ride height after installation?

    Yes. All BC Racing coilovers use full-thread body construction for continuous height adjustment without affecting damper travel.

    We recommend a wheel alignment after any significant ride-height change.

    How do I adjust the damping?

    Damping is adjusted via the top-mounted dial — turn clockwise for firmer, counter-clockwise for softer. Always start with all four corners at the same setting and adjust in equal increments.

    Reviews
    Questions

    Your cart 0

    FREE SHIPPING ON COILOVER KITS

    You've qualified for free shipping

    Your cart is empty.Add a coilover kit to get rolling.

    Complete your setup

    BC Racing Decal / Sticker Small 2 Pack

    BC Racing Decal / Sticker Small 2 Pack

    $5.95