V1-VS Coilover Kit
F: rubber top mount | R: rubber top mount · Honda INTEGRA (Rear Fork) DC2
DS DesignTrack days SKU A-35-DH
Chasing sharper corner control from your Honda INTEGRA (Rear Fork) DC2 on track days? The DS digressive piston builds low-speed damping force to keep roll, pitch and dive in check, without a harsh daily ride.
Your setup
Full specsPlease note that operational noises such as knocks and squeaks from track-oriented products such as pillowball top mounts and track-oriented coilovers (DS, RM, ER, HM, ZX or ZR) are a normal characteristic and are NOT covered by warranty.
$1,849.00
inc. GSTBackorderor 4 interest-free payments of $462.25 with Afterpay or Zip
The DS Series brings BC's proprietary digressive piston to your Honda INTEGRA (Rear Fork) DC2. It adds damping force where you feel it most — at low shaft speeds (0–50mm/s) — to keep body roll, pitch and dive tightly controlled through technical corners, then stays linear as speeds rise so the ride never turns harsh. The result is a Honda INTEGRA (Rear Fork) DC2 that feels planted on a road course without punishing you on the drive there.
Free express shipping Australia-wide on complete coilover kits, dispatched next business day from Kirrawee, NSW. Change-of-mind returns are accepted within 30 days on unfitted, as-new kits in original packaging.
Every BC Racing coilover is covered by a genuine 12-month warranty and is fully rebuildable and serviceable for life. Spare parts are stocked locally, so there's no overseas wait to keep your kit performing.
Chasing sharper corner control from your Honda INTEGRA (Rear Fork) DC2 on track days? The DS digressive piston builds low-speed damping force to keep roll, pitch and dive in check, without a harsh daily ride.
This kit is configured as DS-DH — pillowball mounts front and rear, the setup for track work where steering precision matters more than isolation, with camber adjustment up front where the vehicle's design allows. Expect more road and suspension noise into the cabin as a result. It ships assembled and ready to bolt on out of the box.
Every series below is a direct fit for your Honda INTEGRA (Rear Fork) DC2 — switch instantly, no re-search.
F: rubber top mount | R: rubber top mount · Honda INTEGRA (Rear Fork) DC2
F: rubber top mount | R: rubber top mount or non top mount · Honda INTEGRA (Rear Fork) DC2
F: external reservoir | R: external reservoir · Honda INTEGRA (Rear Fork) DC2
Honda INTEGRA (Rear Fork) DC2
Yes — this kit fits all Honda INTEGRA (Rear Fork) DC2 body styles.
If you have a non-standard chassis or factory suspension upgrade, contact us before ordering and we’ll confirm fitment.
Yes. All BC Racing coilovers use full-thread body construction for continuous height adjustment without affecting damper travel.
We recommend a wheel alignment after any significant ride-height change.
Damping is adjusted via the top-mounted dial — turn clockwise for firmer, counter-clockwise for softer. Always start with all four corners at the same setting and adjust in equal increments.
Your cart 0
Extend your warranty to 24 months + $100.00
Your kit includes 12 months cover — double it to 24 months of parts & rebuild protection. Most buyers add it.
Complete your setup
BC Racing Decal / Sticker Small 2 Pack
$5.95