SKU SP-2PCE-KIT-TANKLESS-12.5MM
Stanceparts Tankless Air Cup Kit (2pce) - Front Kit
$1,499.00
inc. GSTIn stockor 4 interest-free payments of $374.75 with Afterpay or Zip
- Free express ship Australia-wide
- 12-month warranty Genuine BC cover
- Rebuildable for life Service & refresh, not replace
- Spares in stock Fast parts, no overseas wait
Overview & features
AIR CUP LIFT SYSTEM
A perfect combination of air ride and coilovers. With air cup suspension, you keep the ride quality and performance of your coilovers and have the ability to raise your car with the push of a button. A great system for show, track, drift, or daily-driven cars.
HOW DOES IT WORK?
It is an air cylinder on top of your coilover. Normally, you will drive low, without the cups pressurized. Whenever you need to pass an obstacle, such as a speed bump or a driveway, you can apply pressure to the cups and it will raise your car by 50mm.
UNIVERSAL
The air cup lift system is compatible with 90% of all coilover brands. Though your coilover must meet a certain dimensional requirement, otherwise, the system will not fit.
With a tankless setup, it will take around 4-5 seconds to lift.
If you’re looking for an instant lift (1 sec), you should get a setup with a tank.
This kit includes everything you need to install the air cup lift system:
- 2 air cups
-
150psi compressor setup
-
Wiring harness
-
3-way valve
-
Pre-wired 16mm LED switch
-
12-meter airline
- T-splitter
2-year warranty on the air cups.
1-year warranty on the compressor setup.
Make sure you have enough clearance around the coilovers, the air cups are 120mm in diameter, and the fitting is 17mm. (110mm air cups are available on request)
For a guide on how to measure for the Stanceparts cup sizes required, & Installation,
Click Here for STANCEPARTS FITMENT REQUIREMENTS
Shaft diameter:
- 12.5mm
- 14mm
- 15mm
- 16mm
- 18mm
- 20mm
- 22mm
- 40mm
- 44mm
- 44.5mm
- 45mm
- 50mm Custom
- 53mm Custom
For assistance when ordering, email us at sales@bcracing.com.au.
What's in the box
Specifications
Shipping & returns
Free express shipping Australia-wide on complete coilover kits, dispatched next business day from Kirrawee, NSW. Change-of-mind returns are accepted within 30 days on unfitted, as-new kits in original packaging.
Warranty
Every BC Racing coilover is covered by a genuine 12-month warranty and is fully rebuildable and serviceable for life. Spare parts are stocked locally, so there's no overseas wait to keep your kit performing.
Common questions
Will this kit fit my vehicle?
Yes — this kit fits all body styles.
If you have a non-standard chassis or factory suspension upgrade, contact us before ordering and we’ll confirm fitment.
Can I adjust ride height after installation?
Yes. All BC Racing coilovers use full-thread body construction for continuous height adjustment without affecting damper travel.
We recommend a wheel alignment after any significant ride-height change.
How do I adjust the damping?
Damping is adjusted via the top-mounted dial — turn clockwise for firmer, counter-clockwise for softer. Always start with all four corners at the same setting and adjust in equal increments.
Your cart 0
Extend your warranty to 24 months + $100.00
Your kit includes 12 months cover — double it to 24 months of parts & rebuild protection. Most buyers add it.
Your cart is empty.Add a coilover kit to get rolling.
Complete your setup
BC Racing Decal / Sticker Small 2 Pack
$5.95